![keeping-watch-over-the-oceans-with-data-buoys-[hackaday]](https://i0.wp.com/upmytech.com/wp-content/uploads/2023/12/159985-keeping-watch-over-the-oceans-with-data-buoys-hackaday-scaled.jpg?resize=800%2C445&ssl=1)
Keeping Watch Over the Oceans with Data Buoys [Hackaday]
When viewed from just the right position in space, you’d be hard-pressed to think that our home planet is anything but a water world. And in all the ways that count, you’d be right; there’s almost nothing that goes on on dry land that isn’t influenced by the oceans. No matter how far you are away from an ocean, what’s going on there really matters.
But how do we know what’s going on out there? The oceans are trackless voids, after all, and are deeply inhospitable to land mammals such as us. They also have a well-deserved reputation for eating anything that ventures into them at the wrong time and without the proper degree of seafarer’s luck, and they also tend to be places where the resources that run our modern technological society are in short supply.
Gathering data about the oceans is neither cheap nor easy, but it’s critically important to everything from predicting what the weather will be next week to understanding the big picture of what’s going on with the climate. And that requires a fleet of data buoys, outnumbering the largest of the world’s navies and operating around the clock, keeping track of wind, weather, and currents for us.
Data Buoy History
Considering how important ocean data is, we’ve only been able to make direct measurements of what’s going on out there for a shockingly short time. Apart from observations from ships at sea, which go back to the beginnings of marine wireless transmissions, the US has only been deploying dedicated data buoys since the 1940s. Early buoys were equipped with battery-powered instruments that only made the crudest of measurements, and were often controlled by clockwork-driven mechanisms that made frequent servicing visits necessary. Data was usually transmitted over HF radio links using Morse code, so reports were subject to the vagaries of ionospheric conditions and had to be collated manually.
The 1950s and 1960s saw rapid improvements in electronics, and buoys began to be outfitted with more and better sensors. In addition, improvements in battery technology and eventually solar power decreased the need for frequent service calls, making it possible to deploy buoys further out to sea. Improvements in materials, especially polymers, made stronger moorings possible as well, which allowed buoy deployments in deeper and deeper water and opened up vast amounts of the Earth’s surface to direct monitoring. The development of satellite technology was also an important step, not only for their ability to reliably gather data from buoys far offshore, but for the images and remote sensing they were able to perform, providing valuable context for the data coming back from buoys.
Perhaps even more important than technological improvements in weather buoys was the development of the systems needed to gather and analyze their data, as well as building organizations to coordinate the entire process. The development of computers in the 60s and 70s made the former possible, while the creation of consortiums like the National Data Buoy Center (NDBC) covered the latter. As one might expect, deploying a large number of buoys into some of the deepest waters on the planet and keeping them running is an expensive business, with individual agencies and institutions unable to foot the bill for an entire network. Each institution therefore tends to own and operate a small fleet of buoys, which are part a large network where members all share their data.
Buoy Types
If there’s one description of a standard data buoy, it’s that there’s no such thing as a standard data buoy. It’s not so much that buoys are all bespoke designs; there are only so many ways to build something that will float in one place reliably. It’s more that the specifics of where the buoy will be deployed and what data it will be expected to collect determine what the thing will look like, and what equipment will be loaded aboard.
![](A 3-m data buoy with a 3-m hull. The cage prevents seals from climbing up and sunning themselves on it. Source: <a href="https://www.ndbc.noaa.gov/obs.shtml">National Data Buoy Center</a>.<br />
‘ data-medium-file=”https://hackaday.com/wp-content/uploads/2023/12/3mdiscus_scoop_seal_cage.jpg?w=400″ data-large-file=”https://hackaday.com/wp-content/uploads/2023/12/3mdiscus_scoop_seal_cage.jpg?w=800″ class=” wp-image-652530″ alt=”” width=”384″ height=”288″ srcset=”https://hackaday.com/wp-content/uploads/2023/12/3mdiscus_scoop_seal_cage.jpg 1000w, https://hackaday.com/wp-content/uploads/2023/12/3mdiscus_scoop_seal_cage.jpg?resize=250,188 250w, https://hackaday.com/wp-content/uploads/2023/12/3mdiscus_scoop_seal_cage.jpg?resize=400,300 400w, https://hackaday.com/wp-content/uploads/2023/12/3mdiscus_scoop_seal_cage.jpg?resize=800,600 800w” sizes=”(max-width: 384px) 100vw, 384px”><figcaption class="wp-caption-text">A 3-m data buoy with a 3-m hull. The cage prevents seals from climbing up and sunning themselves on it. Source: <a href="https://www.ndbc.noaa.gov/obs.shtml" target="_blank" rel="noopener">National Data Buoy Center</a>.</figcaption></figure>
<p>A data buoy is obviously nowhere near as complicated as, say, a container ship or a naval frigate. But there’s still some pretty sophisticated naval architecture that goes into data buoy designs. Early buoys were prone to capsizing, which tends to be bad for the instruments mounted on their superstructures. Getting the right mix of hull shape, ballast location and amount, mooring mounts, and superstructure design is a delicate dance, complicated by the fact that unlike ships, data buoys can’t maneuver out of the way of rough weather; indeed, their main purpose is to ride out a storm and tell us what’s going on.</p>
<p>One common design for data buoys is the discus type, with either disc-shaped or toroidal hulls. NDBC buoys range from 3 meters in diameter to a whopping 12 meters. The larger 10- and 12-m buoys are steel-hulled and need to be towed out to their moorings and serviced by larger vessels. Smaller buoys, such as the 3-m discus buoys and the 6-m boat-hulled <a href="https://en.wikipedia.org/wiki/Navy_oceanographic_meteorological_automatic_device" target="_blank" rel="noopener">NOMAD buoys</a> are made from aluminum. Aluminum buoys have some advantages over their steel-hulled cousins; they’re lighter and can therefore be towed and serviced by smaller vessels, and they tend to interfere less with instruments like compasses and magnetometers. They also handle corrosion better, a serious concern in a saltwater environment and in locations where seabird droppings will accumulate. On the other hand, aluminum buoys are not as strong as steel hulls, especially in shipping lanes or where <a href="https://www.americanoceans.org/facts/orcas-attacking-boats/" target="_blank" rel="noopener">orcas might want to play with floating things</a>.</p>
<h2>Moorings</h2>
<p>Whatever physical shape the buoy’s hull takes, a lot of marine engineering goes into making sure it’s a stable and reliable platform. Hydrodynamic stability is a must; data buoys are destined for a rough ride and need to stay upright and in place on their moorings. Buoys are typically designed to be “stiff,” which means they will have a short roll period in heavy seas and tend to react very quickly when external forces heel it, or tip it to one side or another. A stiff vessel tends to ride waves better than a “tender” one, and while not comfortable for passengers, works just fine for a data buoy. Overall buoyancy is important, too; the buoy has to have enough reserve buoyance to pop back up to the surface if it somehow manages to become submerged. Enough buoyancy to lift the moorings and anchor off the sea floor is important as well, in case the buoy gets accidentally dragged to deeper water thanks to currents, storms, or snagging on a vessel.</p>
<figure aria-describedby="caption-attachment-652524" class="wp-caption aligncenter"><img loading="lazy" decoding="async" data-attachment-id="652524" src="https://hackaday.com/2023/12/28/keeping-watch-over-the-oceans-with-data-buoys/moorings_had/" data-orig-file="https://hackaday.com/wp-content/uploads/2023/12/moorings_had.png" data-orig-size="4628,3205" data-comments-opened="1" data-image-meta=)